Horrisophie dodo 3D Privacy Window Film No Glue,Horror House Decor,Artwork with Pentagram Icon Goat Skull Devil Dream Hoody Figure Exorcist Image,Blue,47.24″ H x 23.62″ W for Home&Office
Usage method
1. Clean the glass surface first and keep it smooth.
2. Tear off the transparent protective film (with the help of tape)
3. Spray a lot of water on the glass before pasting.
4. Stick the smooth side of the sticker to the glass.
5.Use rulers or cards to remove water and bubbles.
6. Use a knife to cut off excess parts, and then do not move the stickers.
3-D flash point semi-permeable static Glass Sticker is made of imported materials, with flash points on the surface, flashing under the illumination of light, blurred pattern of common ground glass,perfect and brilliant color of flash point Glass Sticker .
At the same time, the shielding effect is much better than that of common ground glass paste, waterproof and scratch-proof, strong adhesion, thicker base material, static adsorption, no blister, no residual glue, no shrinkage, no glue. No warping. After tearing off, it can be repeatedly pasted on other glass surfaces.
- There are 5 sizes to choose from, currently is 47.24″H x 23.62″W
- Imported environmentally friendly non-toxic pigments, high precision 12-color printing, high reductivity and bright color.pasted without bubbles, removed without residual glue. Surface with protective film.
- Privacy protection, thermal insulation Scratch-proo and waterproof, easy to paste operation, durable and non-fading
- Protect Your Body Health And Life Safety From Broken Glass: Increasing The Glass Strength Or Keeping Glass Fragments Tightly Attached On The Film By Its Original Shape, No Splashing And No Deformation.
- Widely Suitable For Any Places: Kitchen, Bedroom, Living Room, Dining Room, Office, Hotels, Classroom, Lobby, etc. But This One Is Not Recommended For A Total Privacy Needed Place Such As The Bathroom, For It Is A Little Seen Through Within A Close Distance.
